resync.vhd

--###################################################
-- clock domain translate
--
-- V1.00 : clock IN should be lower that clock out
-- v2.00 : clock IN and clock out can be anything
--
--
--


LIBRARY ieee;
USE ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity resync is
port (
    reset               : in std_logic;
    Free_clki       : in std_logic :='1'; -- '0' the clocki  is not a free runing clock -- '1' the clocki is a free running clock 
    clocki          : in std_logic;
    clocko          : in std_logic;
    input               : in std_logic;
    output          : out std_logic
    );
end resync;
architecture behavioral of resync is
signal reg          : std_logic_vector(2 downto 0);
signal mem          : std_logic;
signal glb_rst      : std_logic;


--#################################################
--# here start code
--#################################################
begin

glb_rst <= '0' when reset = '0' or reg(2) = '1' else '1';

process(glb_rst,clocki)
begin
    if glb_rst = '0' then
        reg(0)  <= '0';
    elsif rising_edge(clocki) then
        if input = '1'  and mem = '0' then
            reg(0) <= '1';
        end if;
    end if;
end process;

process( reset,clocki)
begin
    if reset = '0' then
        mem     <= '0';
    elsif rising_edge(clocki) then
        mem <= input and Free_clki;
    end if;

end process;

process(glb_rst,clocko)
begin
    if glb_rst = '0' then
        reg(1) <= '0';
    elsif rising_edge(clocko) then
        reg(1) <= reg(0);
    end if;
end process;

process(reset,clocko)
begin
    if rising_edge(clocko) then
        reg(2) <= reg(1);
    end if;
end process;

output <= reg(2);

end behavioral;